Skip to main content

Preventative Maintenance Checklist

Hardware​

Verify machine is level
Verify gearbox/motor operation
Inspect spindle taper condition (ATC Spindle)
Inspect toolholders and grease pull studs (ATC)
Grease linear Bearings
Grease Ballscrews
Inspect Ballscrew pillow block nuts
Inspect Motor Couplers

Electrical​

Clean electrical cabinet
Inspect connections and terminals
Inspect electrical ground connections
Check Emergency Stop Operation
Check axis motors and cables

Air and Coolant​

Inspect all air lines and hoses
Inspect all coolant lines
Ensure correct air pressures (ATC)
Check Coolant levels

Spindle​

Spindle Runout check
Clockwise and Counterclockwise rotations are correct
Emergency stop functions
Spindle is aligned ("Trammed") perpendicular to machine bed

Software​

Check Gladius most recent
Check Firmware most recent
Check Hardware Settings
Check Soft Limits
Check Sensor Input Operations

Z Tool Offset Probe System​

Ensure probe is perpendicular to Spindle
Ensure probe physical operation

3D Probe System​

Ensure runout of probe is concentric
Ensure physical operation